| Certification: | RoHS, CCC, ISO: 9001, CE |
|---|---|
| Condition: | New |
| Customized: | Non-Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Range Of Product | FL8 |
| Product Or Component Type | Logic controller |
| Rated Supply Voltage[Us] | 24VDC |
| Discrete Input Number | 8 |
| Discrete Output Type | NPN Transistor |
| Discrete Output Number | 8 |
| Discrete Output Voltage | DC 5V~30V; |
| Discrete Output Current/Point | Max 2A |
| Discrete Output Current/Group | Max 4A |
| Series | FL8 | ||
| Reference | FL8-E8-D | FL8-E16-D | FL8-E32-D |
| CPU | Quad-core 1GHz | ||
| Memory | 1GB | 2GB | 2GB |
| HD | 4GB | 8GB | 8GB |
| Motion Axis | 8 Axis of EtherCAT+Pulse Axis | 16 Axis of EtherCAT+Pulse Axis | 32Axis of EtherCAT+Pulse Axis |
| Pulse Axis | 6 axis 200KHz | ||
| Left Expansion | Support left expansion (4G Cat1 or WiFi wireless, serial port) | ||
| Ethernet | 2 x 100M | ||
| Ethercat | Support (EtherCAT master station * 1, support up to 72 slave stations) | ||
| Serial port | 2 x RS485 | ||
| CAN communication | 1 x CANOPEN | ||
| Program Storage | 32M | ||
| User Data Storage | 128M | ||
| Data Storage | 128KBytes in area I, 128KBytes in area Q, 512KBytes in area M, 800KBytes in retain area, other variables: unlimited | ||
| Other connectors | USB flash disk (TYPE-C) program download, data storage | ||
| Motion Function | ,CAM, Gear, linear interpolation, circle interpolation | ||
| HSC | 7 point 200KHz | ||
| Build in IO | 8-point input (source/sink), 8-point output (NPN) | ||
| Right Expansion | Max 31 IO | ||
| Program language | Codesys 3.5.19.0(IL,LD,ST,SFC,CFC,FBD) | ||
| Power | DC24V±20% | ||
| Bus Protocol | EtherCAT, Modbus-TCP, Canopen, Modbus-RTU, OPC UA | ||
| Real-timeclock | RTC integrated | ||
| Characteristics | Parameter |
| Rated Voltage | DC 24V |
| Input Range | DC 0V~28.8V |
| Rated Current | 7mA |
| Peak Voltage: | 30V |
| Peak Current | 9mA |
| Voltage in state 1 | >15V |
| Voltage in state 0 | <5V |
| Current in state 1 | >2.5mA |
| Current in state 0 | <1.0mA |
| Isolation | -Optocoupler |
| Input impedance | 3.3kΩ |
| Filter time | Default 1ms, 16 equally divided levels selectable from unfiltered to 100ms |
| Compatibility | Compatible with 2/3 wire sensors |
| Input type | Source/Sink |
| Cable length and type | Max 100m shielded cable, 50m unshielded cable |
| Protection (overvoltage) | Maximum 30V, limited to 1 hour per day frequency |
| Wiring terminal | Removable terminal block |
| Characteristic | Parameter |
| Output type | NPN |
| Rated voltage | DC 24V |
| Voltage range | DC 19.2V~28.8V |
| Rated current | 2A |
| Current/goup | 4A* Output point of each group |
| Voltage drop | Maximum 1V DC |
| Leakage current when turned off | <5μA |
| Maximum power of incandescent lamp | 2.4W |
| Derating | None |
| Start time | Maximum 34μs |
| Turn-off time | Maximum 250μs |
| Maximum output frequency | 1kHz |
| Short circuit protection | Yes |
| Peak short-circuit output current | 1.3A |
| Self-recovery after short circuit or overload | Per 10ms |
| Clamping voltage | Maximum 39V±1V DC |
| Isolation | 500V AC between output and internal logic |
| Type of Cable | Unshielded |
| Cable length | 50m Unshielded 50m |
| Wiring terminal | Removable terminal block |
| Category | Characteristic |
| Operating ambient temperature | -10ºC~60ºC |
| Storage temperature | -20ºC~70ºC |
| Relative humidity | 5%~95%, without condensation |
| Class of pollution | 2(IEC60664) |
| Class of protection | IP20 |
| Coating | Coated protection, dry film thickness ≥ 20μm; reinforced dry film thickness ≥ 40μm |
| Altitude | Operation:0m~3,000m; Transportation:≤6,000m |
| Seismic performance | 5~13.2Hz Amplitude 7mm, 13Hz~100Hz Acceleration 2G, 20 times each in X, Y and Z axes |
| Impact performance | Semi-positive sine wave, acceleration 15G, duration 11ms, 6 times in each of the X, Y and Z directions |
Safety notes
If the specified voltage range cannot be maintained, the output may not switch as expected. Please use a proper safety interlock and voltage monitoring circuit.| Characteristic | Value |
| Rated voltage | 24V DC |
| Supply voltage range | 19.2V~28.8V DC |
| Power interruption time | 10 ms at 24V DC |
| Maximum peak current | 3A |
| Maximum power consumption | 6.5W |
){kind=link}